3d-robotics X8 Plus Manuel d'utilisateur télécharger pdf (Page 9)

Power Management

The X8 is powered by a rechargeable lithium polymer (LiPo) battery. When fully

charged, the battery provides up to 15 minutes of flight time depending on payload,

environmental conditions, and flying style. Flying with a gimbal, GoPro, and FPV

system can reduce flight time by up to 5 minutes. Flying aggressively or in high winds

can affect power consumption and reduce flight time. Monitor power consumption

using the flight data display on the controller (press and hold the DN button).

When the battery reaches the low voltage limit, the X8 will initiate a low battery failsafe

and land automatically at the current position. (See page 20 for more information about

failsafes.) To avoid a low battery failsafe, monitor battery voltage during flight on the

controller’s flight data display, and end your flight before the battery reaches the low

voltage limit.

Controller

Press and hold the DN

button to view flight data.

flight battery mAh consumed since armed

Another way to monitor power consumption is by using milliamp-hours (mAh).

Monitor the mAh on the controller, and ensure that it does not exceed 8,000

mAh (80% of the battery’s available capacity). Exceeding 8,000 mAh can

render the battery permanently unusable.

Do not exceed 8,000 mAh for a fully charged X8+ battery.

flight battery level

Full battery: 16.8 V

Low battery limit: 14 V

End your flight at 14.1 V.

Controller Flight Data Display: Screen 1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Pas de commentaire

3d-robotics X8 Plus Manuel d'utilisateur Page 9