3d-robotics PPM Encoder Manuel d'utilisateur télécharger pdf (Page 2)

signal (s) white wire

power (+) red wire

ground (-) black wire

Connect a PPM jumper (included with APM)

to signal pins 2 and 3. Connect three-wire

cable to ground, power, and signal pins 1.

PPM jumper

Pixhawk

ground (-) black wire

power (+) red wire

signal (s) white wire

Connect to RC pins.

Connect to signal, power,

and ground input pins 1.

signal (s) white wire

power (+) red wire

ground (-) black wire

Connect the three-wire cable to

your autopilot’s input pins.

PX4

APM 2.6

Connect the three-wire cable to

the encoder’s three-position port.

1 2 3

Pas de commentaire

3d-robotics PPM Encoder Manuel d'utilisateur Page 2